Characterising noise signals in 2-phase solid gas flows

Pneumatic conveying of powder and granular material involve the mixed flow of solid particles in air. Characterisation of solid/gas flow regimes is important for the design, operation and control of plants involving such two-phase processes. This paper describes preliminary studies directed at identifying flow regimes in solid/gas flows by analysis of the process `noise' signals from a flow transmitter which has a relatively wide frequency response.

Studying and evaluating anti-corrosion coatings and inhibitors using the wire beam electrode method in conjunction with electrochemical noise analysis

Purpose – To provide a summary of research work carried out mainly in the authors' group for evaluating various protective coatings including rustproofing oils, and also for studying corrosion inhibitors using the wire beam electrode (WBE) method.

Design/methodology/approach – A range of published papers published during the past 15 years was summarised and reviewed. Recent research work in the authors' group was also included, which involved the combined use of the WBE with electrochemical noise analysis and the scanning reference electrode technique.

Findings – The WBE method has been developed into a very useful tool of evaluating the performance of coatings and inhibitors. In particular, The WBE is uniquely applicable for determining the performance of coatings and inhibitors to control localised corrosion.

Research limitations/implications – Focusing mainly on recent research.

Practical implications – A useful source of information for researchers and graduate students working in the areas of organic coating and inhibitor research.

Originality/value – The first summary or review on this research topic.

Monitoring batch treatment inhibitor performance continuously using electrochemical noise analysis

Electrochemical noise analysis (ENA) was used to monitor continuously the formation and deterioration processes of a commercial batch treatment inhibitor film of the type used for protecting against CO₂ corrosion in oilfields; ENA was shown to be able to follow effectively the formation and deterioration processes of batch treatment inhibitor films. As an inhibitor film formed, the current noise amplitude decreased rapidly and the noise resistance R_n, which is deducible from the voltage and current noise records, was found to increase sharply. Conversely, as the inhibitor film deteriorated, the current noise amplitude increased rapidly and R_n decreased rapidly. In the corrosion inhibition system studied, the noise resistance was confirmed to be similar to the linear polarisation resistance. Based on the calculation of R_n on a continuous basis, a technique is proposed to study fast corrosion processes.

Factors affecting the determination of electrochemical noise resistance

The similarity between electrochemical noise resistance (Rn) and polarization resistance (Rp) has been confirmed in many laboratories, and a new method for corrosion rate determination has been developed based upon this similarity. However, this method remains controversial. Some researchers have reported experimental results that did not support a similarity between Rp and Rn. Other researchers have found that this similarity does not hold true for every system. To address this controversy, factors affecting the measurement and calculation of Rn were investigated. Several factors - including instrument noise, direct current (DC) trend, noise sampling rates, and noise sampling duration - can affect the accuracy of Rn determination signiftcantly and, in some cases, can cause disagreement between Rn and Rp. It was recommended that a system check be carried out to avoid the influence of these factors.

Interpreting electrochemical noise resistance as a statistical linear polarisation resistance

A theoretical analysis on the electrochemical noise resistance is carried out based on basic electrochemical corrosion theory. It is proven that the noise resistance is equivalent to the polarisation resistance and is in fact a special form of linear polarisation resistance, namely statistical linear polarisation resistance.

Review: The preliminary study for the interpretation of electrochemical noise with continuous wavelet transform

Random fluctuations of the electrical quantities (electrode potential and cell current) in electrochemical systems commonly are referred to as electrochemical noise (ECN). The ECN signal for the corrosion of mild steel in reinforced concrete specimen was analyzed with the Continuous Wavelet Transform (CWT). The original signal was transformed into a time-frequency phase plane with colors representing the coefficients of the CWT. The signal shows a self-similarity structure in the phase plane. Through this way, the chaotic nature of corrosion process is manifested.

Localized corrosion and inhibition studies using the wire beam electrode in conjunction with the electrochemical noise analysis and the scanning reference electrode techniques

Several new technical developments have been made based on the combined use of the wire beam electrode (WBE), electrochemical noise analysis (ENA) and the scanning reference electrode technique (SRET). These have included: (i) The WBE-R n method- the combined use of the WBE and the noise resistance (Rn) to map the rates and patterns of uniform or localized corrosion; (ii) The WBE-Noise Signatures method- the combined use of the WBE and the noise signature to detect the origination and propagation of localized corrosion; and (iii) The WBE-SRET method- the combined use of the WBE and SRET to investigate localized corrosion from both the metallic and electrolyte phases of a corroding metal surface. This paper presents a brief review on these novel methods and their applications for detecting general and localized corrosion, for mapping the rates of corrosion, and for studying corrosion inhibitors.